Ricoh FT4227 Manual page 562

COPY QUALITY ADJUSTMENT
9.18.4 LCT Side to Side Registration Adjustment
When:
Purpose:
Adjustment standard:
How:
1. Remove the following covers:
LCT front cover, LCT rear cover, right front lower cover, and right rear
lower cover
2. Loosen the 4 screws fixing the LCT unit to the copier frame.
3. Move the whole LCT unit to the desired position and tighten the screws.
4. Reinstall the covers.
If side-to-side registration on copies fed from the
large capacity tray is not within the adjustment
standard
To maintain proper side to side registration from
the large capacity tray.
0 ±2 mm (0 ±0.08")
Change the LCT unit fixing position perpendicular
to the paper travel direction. This will shift the
paper position perpendicular to the paper travel
direction.
5-106
12 February 1992