Ricoh FT4227 Manual page 167

COPIER INSTALLATION
1.2 INSTALLATION PROCEDURE
[A]
[C]
NOTE: Keep the shipping retainers after installing the machine. They will
be reused if in the future the machine is transported to an
another location.
Proper reinstallation of the shipping retainers is required in order
to avoid any transport damage.
1. Remove the 12 strips of tape [A] as shown.
2. Open the front door and remove 4 strips of tape [B] as shown.
3. Pull out the duplex tray [C] and remove the 2 strips of tape [D] and 3
sheets of paper [E] (duplex machine only).
[A]
[D]
3-2
[A]
[B]
[E]
10 July 1992
[A]