Sfp Modules; Supported Sfp Modules; Guidelines For Using The At-Sptx Module - Allied Telesis AT-FS980M/28DP Installation Manual

SFP Modules

Supported SFP
Modules
Guidelines for
Using the AT-
SPTX Module
Allied Telesis supports its SFP products. Before installing SFP modules
into the FS980M series switch, review a list of the supported SFP products
and restrictions.
Here is a list of supported Allied Telesis SFP products:
AT-SPTX (See "Guidelines for Using the AT-SPTX Module".)

AT-SPSX

AT-SPSX/I

AT-SPSX2

AT-SPEX

AT-SPLX10

AT-SPLX10/I

AT-SPLX40

AT-SPZX80

AT-SPBD10-13

AT-SPBD10-14

AT-StackXS/1.0

AT-SP10TW1

Note
The SFP slots support 1000Mbps speed only.
Allied Telesis supports the AT-SPTX module on the AT-FS980M/28 switch
with some restrictions. The AT-FS980M/28 switch has four SFP slots.
Before using the AT-SPTX SFP module on the AT-FS980M/28 switch,
review the following guidelines:
The AT-FS980M/28 switch can have up to two AT-SPTX modules.

When you use two AT-SPTX modules on the he AT-FS980M/28

switch, you must use port 25 and port 26.
When two AT-SPTX modules are used on port 25 and port 26, you

can use only the AT-SP10TW1 or AT-StackXS/1.0 module on port
27 and port 28.
The operating temperature of the AT-FS980M/28 switch using the

AT-SPTX module must be between 0° C to 40° C (32° F to 104° F).
FS980M Series Fast Ehternet Managed Switches Installation Guide
23