Advertisement
Scale Indicator Tractor
Installation - Optional
1. Mount the Angle Bracket onto Tractor Bracketry
where convenient for the operator. See Figure 2-31.
2. Attach Straight Bracket to Angle Bracket with 1/2-13
x 1 Bolt and Flanged Locknuts.
3. Attach the Scale Display Bracket to Straight Bracket
with 3/8-16 x 1-1/4 Bolts and Flanged Locknuts.
4. Attach the GT400 Indicator Bracket to Scale Display
Bracket with 1/4-20 x 1/2 Bolts and Flanged
Locknuts.
GT400 Indicator
Bolt,1/4-20 x 1/2
Power Cable
3-Port Splitter
F-1021-0422
TABLE OF CONTENTS
Bolt,3/8-16 X 1-1/4
Bolt,1/4-20 X 1/2
Bracket
GT400 Scale
Indicator
Locknut,
Flange 3/8-16
Indicator Cable
Figure 2-31: Scale Indicator Tractor Installation
5. Tilt the GT400 Scale Indicator to latch the top of the
GT400 Indicator Bracket. Secure bottom with 1/4-20
x 1/2 Bolts and Spiral Flanged Locknuts.
6. Plug the Power and Indicator Cables into the bottom
of GT400 Scale Indicator.
7. Attach 3 Port Splitter to Indicator Cable.
8. Plug GT400 Scale Indicator Power Cable into the
Tractor and connect each Load Cell Cable to 3 Port
Splitter.
9. Secure cables with tie wraps.
10. Refer to GT400 Vendor Operator's manual for
cabling and set-up instructions.
Scale Display
Bracket
Bolt,1/2-13 X 1
Locknut,
Flange 1/2-13
Locknut,
Flange 1/4-20
Straight
Bracket
Angle Bracket
2-33
Advertisement
