Advertisement
Scale Installation - Optional
CAUTION
Do not work on or under this machine unless
securely blocked and supported by a hoist or
tractor or by other sufficient means.
WARNING
Do not attempt to lift heavy parts manually. Use a
hoist or a fork lift to move these parts into
position.
1. Secure Seeder and Seed Box.
2. Remove eight 3/4-10 x 2 Bolts and Lock Washers
from the top and bottom of Seed Box Mounts. See
Figure 2-29.
3. Raise the Seed Box, remove the Spacer Blocks.
4. Insert Load Cells with the Load Cell Cord oriented
toward the middle. See Figure 2-30.
5. Secure each Load Cell to the bottom Seed Box
Mounts with two 3/4-10 x 2 Bolts and Lock Washers
Power Cord
Load Cell
2-32
TABLE OF CONTENTS
GT400 Scale
Indicator
Indicator Cord
Figure 2-30: Load Cell Schematic - Optional
6. Carefully lower the Seed Box ensuring the cutout on
the Seed Box goes over the Load Cell Cord.
7. Secure Seed Box to each Load Cell with two 3/4-10 x
2 Bolts and Lock Washers.
Seed Box
Load Cell
Figure 2-29: Load Cell Installation - Optional
3-Port Splitter
SSP16 ScaleSchematic
Bolt,3/4-10 x 2
Lock Washer,3/4
Load Cell cable
shown shorter
than actual
SSP16 OpLoadCell
Seed Box
Mount
Lock Washer,3/4
Bolt,3/4-10 x 2
Load Cell
F-1021-0422
Advertisement
