Advertisement
Brillion Elite Mini Monitor
Tractor Installation - Optional
1. Mount Angle Bracket onto Tractor where convenient
for the operator. See Figure 2-28.
2. Attach Straight Bracket to Angle Bracket with 1/2-13 x
1-1/2 Bolt and Flanged Locknut.
3. Attach the Brillion Elite Mini Monitor to the Monitor
Mount with Metric Machine Screws, provided with
Monitor.
Straight Bracket
Machine Screw,
#10-24 x 1
Brillion Elite
Mini Monitor
Figure 2-22: Brillion Elite Mini Monitor Tractor Installation - Optional
F-1021-0422
TABLE OF CONTENTS
Lock Washer,#10
Monitor
Mount
Machine Screw
M5-0.8 x 16
4. Attach the Monitor Mount to the Straight Bracket with
#10-24 x 1 Machine Screws, Flat Washers, Lock
Washers, and Nuts, provided with Monitor Mount.
5. With the Brillion Elite Mini Tractor Harness, plug the
14-Pin Connector into the Monitor, the 3-Pin Power
Connector into the Tractor Convenience Outlet and
the 6-Pin Connector into the 240" Extension Harness.
6. Check clutch operation: Clutch will engage when
power is applied. (Clutch will make a clicking sound).
See "Brillion Elite Mini Monitor" on page 4-1.
Nut,#10-24
Flat Washer,#10
Locknut,Flange
1/2-13
Bolt,1/2-13 x 1-1/2
Angle Bracket
2-25
Advertisement
