Advertisement
5. Attach the Manual Holder to the 3-PT Hitch with
1/4-20 x 1 Bolts, Flat Washers and Locknuts.
6. Attach the Connector Holder to the Air Manifold
Bracket Assembly with 1/4-20 x 3/4 Bolts, Flat
Washers and Locknuts.
F-1021-0422
TABLE OF CONTENTS
Connector
Holder
Flat Washer,1/4
Bolt,1/4-20 x 3/4
Bolt,1/4-20 x 1
Flat Washer,1/4
Manual Holder
SSP16 OpManualHolder
Figure 2-4: 3-PT Hitch (2 of 2)
7. Place the Calibration Crank and Wrenches in the
Toolbox. See Figure 2-4.
Locknut,1/4-20
Calibration Crank
Wrenches
2-5
Advertisement
