Advertisement
3-PT Hitch Installation
1. Center the 3-PT Hitch Assembly to Seeder Frame
and attach with 3/4-10 U-Bolts, Flat Washers and
Locknuts. Tighten. See Figure 2-3.
2. Attach the Air Manifold Bracket Assembly to the 3-PT
Hitch with 3/8 x 16 x 5-1/4 Bolts, and Flanged
Locknuts. Do Not tighten until harnesses are
installed.
Lower,3-PT Pin
Locknut,3/4-10
Flat Washer,3/4
U-Bolt,3/4-10
2-4
TABLE OF CONTENTS
Lynch Pin,7/16
Top Link Pin
Bolt,3/8-16 x 5-1/4
Lynch Pin,7/16
SSP16 OpHitch3Pt
Seeder Frame
Figure 2-3: 3-PT Hitch (1 of 2)
3. Attach the Toolbox to the 3-PT Hitch with 3/8-16 x 1
Bolts, Flat Washers and Flanged Locknuts.
4. Insert Top Link and lower 3-PT Pins. Secure with 7/16
Lynch Pins.
Air Manifold
Bracket Assembly
3-PT Hitch
Flange Locknut,3/8-16
Bolt,3/8-16 x 1
Flat Washer,3/8
Toolbox
Lynch Pin,7/16
Lower,
3-PT Pin
Flange Locknut,3/8-16
F-1021-0422
Advertisement
