Troubleshooting; Flowchart To Remedy The Troubles - Renesas M34286T2-CPE User Manual

M34286T2-CPE User's Manual

5. Troubleshooting

This chapter describes how to troubleshoot when this product does not work properly.

5.1 Flowchart to Remedy the Troubles

Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools
Homepage.
Turning on emulator
Check LEDs of emulator
Init dialog box of emulator
debugger displayed (first)
Init dialog box of emulator
debugger displayed (second)
Program window of
emulator debugger diplayed
Emulator debugger startup completed
Figure 5.1 Flowchart to remedy the troubles
R20UT0214EJ0200 Rev.2.00
Sep 16, 2010
http://www.renesas.com/tools
Not normal
See "5.2.(1)When the LEDs of the M34286T2-CPE Do Not
Normal
Display Normally
Not normal/Error displayed
1. Check the settings of the emulator debugger.
Normal
See the user
2. Reinstall the emulator debugger.
Not normal/Error displayed
"
See 5.2.(2) When the Init Dialog Box is Not Displayed
Normal
(page 63).
Normal
"
(page 62)
'
s manual of the emulator debugger.
5. Troubleshooting
"
Page 61 of 70