Figure 4. Main Window Of Renesas Flash Programmer After Creating A New Project - Renesas RX600 Series Quick Start Manual

Renesas RX Family RSK-RX65N-2MB – Quick Start Guide

Figure 4. Main Window of Renesas Flash Programmer After Creating a New Project

8. Click Start to begin flashing the example project code onto the board. Once completed, the message
Operation completed should be printed and the status OK should be displayed next to the start button.
9. Disconnect the 5VDC power cable from the RSK-RX65N-2MB board.
10. Disconnect the E2 Lite Emulator ribbon cable from the E2 Lite connector of the RSK-RX65N-2MB board.
R21QS0009EU0100 Rev.1.00 Page 9 of 18
Feb.22.23