Getting Started; Installing Server Into The Rack; Installing Cage Nuts - Inspur NF5266M6 User Manual

4

Getting Started

4.1

Installing Server into the Rack

For detailed information on installing the server into the rack with rails supplied by
Rack Server Installation Guide
Inspur, see
If you would like to use non-Inspur rails, please contact Inspur Customer Service
first to ensure the server can be installed to the rack safely and properly. The
loading-bearing capacity of non-Inspur rails must be higher than 100 kg. If not,
you MUST use Inspur-supplied rails as using these non-Inspur rails may cause
such risks as installation failure. Inspur will not assume any responsibility or
liability for any damage or injury caused by this.
To reduce the risk of personal injury or damage to the equipment, DO secure the
mounting ears to the posts firmly to prevent server from moving or sliding out
from the cabinet.
4.1.1

Installing Cage Nuts

Figure 4-1 Installing a Cage Nut
.
19