Adding/Editing Device Events; Pro-Bus-Controlled Devices; Illustration 64, Pro-Bus-Controlled Device Event Properties Window - Leightronix NET Series Manual

NET Series
Software Operation
 Deleting an Event
To delete an event, select it and press the "Delete" key, or right click the event and
choose "Delete" in the popup menu that appears. You will be prompted for
confirmation before the event is deleted. If the first event in the window is deleted,
the next event is locked in place, if necessary. If any other event is deleted, any
unlocked events immediately below it will float up until they rest against the event
above (unless this causes a device conflict, in which case the first unlocked event
will be locked in place).

ADDING/EDITING DEVICE EVENTS

Adding or editing events from the "Resources" "Device" tab opens boxes like the ones
shown in this section. Click "OK" to submit the event or "Cancel" to abort the add/edit.

PRO-BUS-Controlled Devices

If the device is a VCR or DVD format, the box in Illustration 64, PRO-BUS-Controlled
Device Event Properties Window appears. Refer to Table 16, Editable PRO-BUS-
Controlled Device Event Fields, for a description of the editable event information
fields for a PRO-BUS-controlled device.

Illustration 64, PRO-BUS-Controlled Device Event Properties Window

Page 96 Firmware Ver. 1.00.42/Software Ver. 1.0.2.6 LEIGHTRONIX, INC.
2010-07-09