Unloading Controller Images; Illustration 58, Receive Image Dialog Box; Illustration 59, Image Status Window - Leightronix NET Series Manual

 Receive the current Controller image from the default Controller.
An image received from the default Controller contains the Controller type,
playlist, and the control, device, library, and switch properties last sent to the
Controller.
1. Select "Receive" in the "File" menu or
dialog box confirming that you want to receive the image from the default
Controller (see Illustration 58, Receive Image Dialog Box).
2. Click "Yes" to open the status box shown in Illustration 59, Image Status
Window. To interrupt the send, click the "Cancel" button. If the send
appears to be stalled, cancel it and check your default location IP address
and your network connections.
Progress Bar
A "Receive Completed" message appears when the image has been received.
WinNET will now contain the remote data in an unnamed image.

UNLOADING CONTROLLER IMAGES

If an image is loaded into WinNET, only one Controller will be visible in the "Control"
tab of the "Resources" window and channel tabs will be shown along the left side of
the playlist window.
To unload an image, click "New" in the "File" menu or the
LEIGHTRONIX, INC.
2010-07-09

Illustration 58, Receive Image Dialog Box

Illustration 59, Image Status Window

Firmware Ver. 1.00.42/Software Ver. 1.0.2.6
Software Operation
icon on the main toolbar to open a
Connection
icon on the main toolbar.
NET Series
Attempts
Receiver
Attempts
Page 87