Adding/Editing/Deleting All Events; Illustration 62, Day/Misc Tab Event Properties Box - Leightronix NET Series Manual

ADDING/EDITING/DELETING ALL EVENTS

 Adding an Event to the Day/Misc Tabs
Drag an icon from the "Resources" window's "Device," "Library," or "Switch" tabs
into a playlist window day or "Misc" tab event pane. This opens an "Event
properties" box with editable event information like the one shown in Illustration 62,
Day/Misc Tab Event Properties Box.
To add or change the event information, click on each of the desired editable fields
(described on pages 96–105) and enter the new information. An icon can be
dragged and dropped into the day/misc tabs in the following five ways:
 Empty Window—the event is locked and given the initial time of 12:00 A.M.
(Unless a previous day's event overlaps midnight, in which case, its "End" time
is used.)
 Initial Gap—if an event is dragged into a gap at the start of the day (1
locked and given the initial time of 12:00 A.M. (Unless a previous day's event
overlaps midnight, in which case, its "End" time is used.)
 Any Other Gap—the event is initially an unlocked event with a "Time" equal to
the "End" time of the previous event.
LEIGHTRONIX, INC.
2010-07-09

Illustration 62, Day/Misc Tab Event Properties Box

Firmware Ver. 1.00.42/Software Ver. 1.0.2.6
NET Series
Software Operation
st
row), it is
Page 93