Setting Winnet Viewing And Communication Options; Illustration 38, "Application" Tab Window - Leightronix NET Series Manual

SETTING WINNET VIEWING AND COMMUNICATION OPTIONS

In the "Tools" menu, choose "Options" to open the "Configuration" window. Perform
the following tasks from the five "Configuration" window tabs. Click "OK" on the
bottom of the "Configuration" window to save any changes you have made or "Cancel"
to discard them.
 "Application" tab (see Illustration 38, "Application" Tab Window)
 Under "Time format," select either the 12 hour (AM/PM) format or 24 hour
(military) format.
NOTE:
Series Controller.
 Under "LT Event Schedule," check "Allow global resource property changes"
to permit the editing of resource properties (device, library, and switch items)
that have only been added to a "WinNET-LT" tab playlist. Checking the item
will give you the option to merge those changes into the playlist.
 Under "Log Viewer," click the button to the right of the log viewer field to
select a software program for viewing your Controller's log file.
LEIGHTRONIX, INC.
2010-07-09

Illustration 38, "Application" Tab Window

This does NOT change the time format on the front of your NET
Firmware Ver. 1.00.42/Software Ver. 1.0.2.6
Software Installation and Configuration
NET Series
Page 63