Creating Switch Resources; Illustration 47, Switch Properties Window - Leightronix NET Series Manual

NET Series
Software Installation and Configuration

CREATING SWITCH RESOURCES

Enter the properties of any Controller source inputs not controlled by PRO-BUS
interfaces or DVply under the "Switch" tab of the "Resources" window according to the
following steps (refer to Illustration 47, Switch Properties Window). Example switch
sources are satellite and studio feeds,
character generators, etc.
1. Click on the "Switch" tab of the
"Resources" window.
2. Right-click in the "Switch" window and
select "New" in the context menu (or click
in the "Resources" window and press the
"Insert" key) to insert a new undefined
switch item in the window.
3. When a switch item is selected in the
"Resources" window, its properties are
listed and can be entered in the
"Properties" window. Complete the
following switch property fields:
 "Name": enter a unique and
descriptive name, up to 31 characters.
 "Format": fixed at "Switch."
 "Icon": switch items have a default
icon. If you would like to select a
different icon, open the icon selection
window by selecting the "Icon" field
and clicking the button that appears.
Select an icon, then click "OK" or
double click an icon. Click "Cancel" to
close the icon selection box without
changing the icon.
 "Input": choose the switcher input
connected to the device. Selecting an
input in the "Switch" tab removes it
from the "Input" field list in the "Device"
tab, but does not remove it from the
"Input" field list in the "Switch" tab.
This is so an input can be entered multiple times with various time lengths, but
not used for a device.
 "Length": enter the duration you want the switch to be connected. If you want to
create only one switch item per input, enter the time likely to be used most
Page 74 Firmware Ver. 1.00.42/Software Ver. 1.0.2.6

Illustration 47, Switch Properties Window

LEIGHTRONIX, INC.
2010-07-09