Performing Forced Switches And Viewing Switcher Status; Illustration 83, Mini-T-Net Forced Switch Control; Illustration 84, Net-164 Forced Switch Control - Leightronix NET Series Manual

PERFORMING FORCED SWITCHES AND VIEWING SWITCHER STATUS

 MINI-T-NET
When the Controller is a MINI-T-NET, the lower right switcher section appears in
the control panel window as shown in Illustration 83.
To take a switch:
1. Click the output button to select it (as shown in Illustration 83, the number
turns red). The output button toggles each time you click it.
2. Click the desired input button.
To the right of the output button is a box showing the current input and valid video
status. Green means valid video present, while gray indicates no valid video.
 NET-164
For a NET-164, the lower right switcher section appears in the control panel
window as shown in Illustration 84.
To take a switch:
1. Click the output button(s) to select the desired output(s) (as shown in
Illustration 84, the output 1 number turns red). The output buttons toggle
each time you click them.
2. Click the desired input button to take that input to the selected output(s).
LEIGHTRONIX, INC.
2010-07-09

Illustration 83, MINI-T-NET Forced Switch Control

Illustration 84, NET-164 Forced Switch Control

Firmware Ver. 1.00.42/Software Ver. 1.0.2.6
NET Series
Software Operation
Page 117