Setting Time Zone - Leightronix NET Series Manual

NET Series
Controller Installation and Configuration
CLOCK SETUP STEPS
3. Press "↑" or "↓" to proceed to "Set Clock."
4. Press "→" to select "Set Clock."
5. Press "→" or "←" to position the underscore
under the editable fields and press "↑" or "↓" to
edit the values.
6. Press "→" to enter next screen.
7. Either press "→" again to save your changes
or "←" to abort changes.

SETTING TIME ZONE

Use to set the NET Series Controller's time zone to any of the North American time
zones (see Table 3, Configuring Controller's Time Zone from Front Panel).
NOTE: The Controller's time zone may also be set from WinNET (see "Configuring
Site Information and Clock, Updating Firmware, and Rebooting Controller,"
on page 54).
Table 3, Configuring Controller's Time Zone from Front Panel
TIME ZONE SETUP STEPS
1. From the "MAIN MENU" screen, press "↑" or
"↓" to proceed to "Setup."
2. Press "→" to select "Setup."
3. Press "↑" or "↓" to proceed to "Set Time Zone."
4. Press "→" to select "Set Time Zone."
5. Press "↑↓" to change time zone.
6. Press "→" to enter next screen.
7. Either press "→" again to save your changes
or "←" to abort changes.
Page 28 Firmware Ver. 1.00.42/Software Ver. 1.0.2.6
CORRESPONDING SCREEN DISPLAYS
SETUP MENU
Set Clock
Set clock to Thursday
2004 Feb 19 9:20:26 AM
Press ~ to set clock.
2004 Feb 19 9:20:26 AM
CORRESPONDING SCREEN DISPLAYS
MAIN MENU
Setup
SETUP MENU
Set Time Zone
Set time zone
Eastern (EST5EDT)
Press ~ to set time zone.
Eastern (EST5EDT)
Use `/ˆ
~
Use `/ˆ
~
Use `/ˆ
~
LEIGHTRONIX, INC.
2010-07-09