Dubbing With A Switch; Illustration 73, Example Of Typical Setup For Dubbing With A Switch - Leightronix NET Series Manual

NET Series
Software Operation
c. Select time of event.
d. Set length of event.
e. Set preroll, if desired.
f. Select "Record" in "Command" field.
3. Schedule a playback device action by dragging icon of playback device hardwired
to recording device onto playlist. In the "Event Properties" window that appears,
perform the following:
a. Change "Output" to "<None>."
b. Select day/date of event.
c. Select time of event.
d. Set length of event.
e. Set preroll, if desired.
f. Select "Play" in "Command" field.

DUBBING WITH A SWITCH

NOTE: The following steps only apply to the NET-164 and NET-EC.
Refer to Illustration 73, throughout the following steps.

Illustration 73, Example of Typical Setup for Dubbing with a Switch

Thu, January 1, 2004
12:00:00 PM
1. Select the WinNET-LT tab.
2. Schedule a recording device action by dragging desired recording device icon onto
playlist. In the "Event Properties" window that appears, perform the following:
a. Change "Output" field to one of the following options:
 If you only wish to record, select "<None>."
Page 108
Video
Audio
NET-164
LEIGHTRONIX
Firmware Ver. 1.00.42/Software Ver. 1.0.2.6
Recording VCR
VCR
PRO-BUS™
LEIGHTRONIX, INC.
2010-07-09