Adding/Editing Switch Events; Illustration 69, Switch Event Properties Window - Leightronix NET Series Manual

NET Series
Software Operation
FIELD
Time Scheduled "On-Air" time of the event.
Event Start Choose from the following commands: "Play," "Stop," "Cue/Play,"
Command "Pause," and "Record." It will almost always be "Cue/Play."
Title:Chapter, Fixed in the device and library properties. Reset time is unused.
Setup,
Preroll, and
Length
Event End Choose from the following commands: "Play," "Stop," "Cue/Play,"
Command "Pause," and "Record." It will usually be "Stop."
Fallback input Enter the input to be taken to the output at the end of the event.
field

ADDING/EDITING SWITCH EVENTS

Adding or editing events from the Switch tab opens the box shown in Illustration 69,
Switch Event Properties Window. Click "OK" to submit the event or "Cancel" to abort
the add/edit. Refer to Table 21, Editable Switch Event Fields, for a description of the
editable event information fields for switches.
Page 104

Illustration 69, Switch Event Properties Window

Firmware Ver. 1.00.42/Software Ver. 1.0.2.6
DESCRIPTION
LEIGHTRONIX, INC.
2010-07-09