Connection With Programmable Controller; Connection Via A Got2000 Model And A Programmable Controller - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

1.4.9

Connection with programmable controller

The inverter and FR Configurator2 can be communicated via a programmable controller (CPU module / Ethernet module).
Use a serial port or the Ethernet connector on the personal computer for connection. Refer to
parameters.
 Connection via a programmable controller
 Connection via a programmable controller (CC-Link IE Field Network)
1.4.10 Connection via a GOT2000 model and a
programmable controller
The inverter and FR Configurator2 can be communicated via a GOT2000 model and a programmable controller (CPU module
/ Ethernet module).
Use a USB cable for connection between the computer and a GOT2000 model. Use an Ethernet cable for connection between
the GOT2000 model and a programmable controller and between the programmable controller and inverters. Refer to
51 for GOT-related parameters. Refer to
58
1. OUTLINE
1.4 Connection and parameter setting
USB connector,
Serial port,
Ethernet connector
Personal computer Computer to programmable controller
(FR Configurator2)
(CPU module, Ethernet module)
Programmable controller
(Ethernet module) to inverter
Ethernet
Hub
Ethernet
connector
Inverter
USB connector,
Serial port,
Ethernet connector
Personal computer
Computer to programmable controller
(FR Configurator2)
(CPU module, Ethernet module)
Programmable controller
(CC-Link IE Filed Network master module)
to Inverter
CC-Link IE Field Network
Ethernet
connector
Inverter
page 39 for Ethernet-related parameters.
cable
Up to 64 or
120 inverters
Up to
120 inverters
page 39 for Ethernet-related
page