Graph Window; Graph Window Toolbar - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

3.4.1

Graph window

A
B
Symbol Name
A Tool bar
B Properties
C Sampling item column
Measurement start/stop
D
button
E Graph display area
F Horizontal axis scroll bar Allows scrolling of the displayed section in the graph display area.
G Trigger position
NOTE
• If a normal communication with inverter is not maintained (communication error, etc.), the sampling stops.
• If a fault occurs during sampling, sampling continues.
• During sampling, other communication tasks such as parameter reading are unavailable.
• When parameter write is performed during measurement of graph, waveform data may be incorrect.
• When the negative output of monitor item is enabled/disabled during measurement of graph, the waveform data will be
incorrect.
3.4.2

Graph window toolbar

A B
J
C
Allows operation of the file, history control, and graph display settings.
Setting of the measurement conditions, display conditions, and cursor can be done in the
properties.
Displays the contents of the analog CH and digital CH set by [Waveform] in the settings tab of the
condition properties.
Starts sampling.
Start
Stops sampling. This button only appears when operating.
Stop
Displays the sampled data in a graph.
Shows the position in which the trigger completes. "T" on the graph horizontal axis denotes
measuring time period.
C D E
K L M
D
F
G
Function/description
F G H
N O
1
2
3
4
E
5
6
7
8
9
10
I
135
3. FUNCTION
3.4 Graph