Start And Close Of Fr Configurator2; Starting Fr Configurator2 - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

1.6

Start and close of FR Configurator2

1.6.1

Starting FR Configurator2

There are following ways to start FR Configurator2.
• Start from Start menu
Select [All Programs] from the Start menu (show the All Apps list on Windows® 10 or the Apps view on Windows® 8.1),
click [MELSOFT] -> [FR Configurator2], and select [FR Configurator2] in the sub menu to start FR Configurator2.
• Start from the project file (*.frc2)
(Refer to page 72 for the project file (*.frc2).)
• Select the project file (*.frc2) and execute it (or press the Enter key). The project file settings will be read and FR
Configurator2 will be started.
• Drag and drop the project file to the execution file (FR2.exe) or to the shortcut icon of FR Configurator2. FR Configurator2
will be started.
• Start from Windows Explorer
Select the executable file of FR Configurator2 (FR2.exe) by using Windows Explorer, and double-click (or hit Enter key) to
start FR Configurator2.
NOTE
• The following window may appear at the start up of FR Configurator2. If the window appears, select "Allow".
• In an operation system with antivirus/security software, a warning may appear at starting FR Configurator2. If a warning
appears, permit FR Configurator2 according to the setting procedure of your antivirus/security software.
• If files shown in [Recent] of Windows® 7, Windows® 8.1, or Windows® 10 are stored in system folders (Program Files for
example), the files may not be opened correctly.
Select "Allow"
1.6 Start and close of FR Configurator2
1
2
3
4
5
6
7
8
9
10
69
1. OUTLINE