Download  Print this page

Mitsubishi Electric LAN Control Utility User Manual

Lan control utility.
Hide thumbs

Advertisement

LAN Control Utility
User Manual
1. Introduction ............................................................................................................ 2
1.1. Preparing to use network features .......................................................................................... 2
1.2. Functions and features ............................................................................................................ 2
1.3. Operation environment ............................................................................................................ 2
2. Setup ...................................................................................................................... 4
2.1. Installation of "ProjectorView Global+" .................................................................................... 4
2.2. When deleting "ProjectorView Global+" (Uninstallation) ......................................................... 5
3. Main screen ............................................................................................................ 6
3.1. System settings ....................................................................................................................... 8
4. Projector registration .............................................................................................. 9
4.1. Connection ............................................................................................................................... 9
4.2. Registration of projector to "ProjectorView Global+" .............................................................11
4.3. When changing the projector IP settings .............................................................................. 13
4.4. When changing projector settings ......................................................................................... 14
4.5. When deleting projector registration ..................................................................................... 14
5. Operation of projector .......................................................................................... 15
5.1. Operation of projector by remote controller .......................................................................... 15
5.2. Confi rmation of projector status ............................................................................................ 16
6. Schedule setting ................................................................................................... 17
6.1. Creation of projector group ................................................................................................... 17
6.2. When changing schedule setting .......................................................................................... 18
6.3. When deleting group.............................................................................................................. 19
7. E-mail setting........................................................................................................ 20
7.1. Connection with E-mail server ............................................................................................... 20
7.2. E-mail setting ......................................................................................................................... 20
7.3. Sending test E-mail ................................................................................................................ 20
8. Visual PA2 (Visual PA2 enabled projectors only) .................................................. 21
8.1. Starting Visual PA2 ................................................................................................................ 21
8.2. Saving messages entered and settings specifi ed in Visual PA2 ........................................... 22
8.3. Loading saved data in Visual PA2 ......................................................................................... 22
8.4. Deleting data from Visual PA2 ............................................................................................... 22
8.5. Confi guring the Schedule function of Visual PA2 .................................................................. 23
9. ProjectorView (ProjectorView enabled projectors only) ........................................ 24
9.1. Starting ProjectorView ........................................................................................................... 24
10. Telnet setup (Telnet enabled projectors only) ....................................................... 25
10.1. Displaying the Telnet setting screen ...................................................................................... 25
11. Web UI (RoomView Connected projectors only) .................................................. 26
11.1. Main functions ....................................................................................................................... 26
11.2. Starting Web UI ...................................................................................................................... 26
12. Others ................................................................................................................... 30
12.1. Troubleshooting ..................................................................................................................... 30
12.2. Supported projectors............................................................................................................. 30
Contents

Advertisement

   Related Manuals for Mitsubishi Electric LAN Control Utility

   Summary of Contents for Mitsubishi Electric LAN Control Utility

  • Page 1: Table Of Contents

    LAN Control Utility User Manual Contents 1. Introduction ......................2 1.1. Preparing to use network features ..................2 1.2. Functions and features ......................2 1.3. Operation environment ......................2 2. Setup ........................4 2.1. Installation of “ProjectorView Global+” ..................4 2.2.
  • Page 2: Introduction

    1. Introduction 1.1. Preparing to use network features This projector is equipped with the network function. Before using the network function, perform the following 2 preparation steps. • Installing the ProjectorView Global+ • Confi guring the projector IP address, network password, and network certifi cation settings The projector IP address, network password, and network certifi...
  • Page 3 1. Introduction ® ® Microsoft and Windows are the registered trademark or trademark of Microsoft Corporation in the United States and other countries. (The offi cial name of Windows is Microsoft Windows Operating System.) Adobe, Flash, and Adobe Flash Player are trademarks or registered trademarks of Adobe Systems Incorporated. Crestron, RoomView, Crestron RoomView and RoomView Connected are registered trademarks of Crestron Electronics, Inc.
  • Page 4: Setup

    2. Setup 2.1. Installation of “ProjectorView Global+” Before starting installation, be sure to read “ReadMe.txt” contained in the CD-ROM. Copy “ProjectorView Global+v3_3.msi” contained in the Tools folder of CD-ROM to the hard disk of your personal computer. (1) Double click “ProjectorView Global+v3_3.msi”, and start up the installer of “ProjectorView Global+”.
  • Page 5: When Deleting "projectorview Global+" (uninstallation)

    2. Setup (5) When the installation has been completed, click [Close]. 2.2. When deleting “ProjectorView Global+” (Uninstallation) <Note> • When uninstalling “ProjectorView Global+”, “ProjectorView Global+” should be ended in advance. If the application continues operating, uninstallation can not be performed normally. (1) Double click “ProjectorView Global+v3_3.msi”, and start up the installer of “ProjectorView Global+”.
  • Page 6: Main Screen

    3. Main screen         Menu bar Confi guration You can specify the following settings: Add New Group: You can create a new group. Edit Schedule Setting: You can edit schedule settings set for existing groups. Search Projector: Automatically searches available projectors.
  • Page 7 3. Main screen  Group Name Group of the projector can be selected. When you select “All”, all the registered projectors are displayed. Newly created group(s) are added to the list. When you select your choice of group, all projectors that belong to the selected group are displayed.
  • Page 8: System Settings

    3. Main screen 3.1. System settings (1) Select “System Confi guration” from “Confi guration” of the menu bar on the main screen. • “System Confi guration” window is displayed. (Default settings are shown in the following example.) Item Description Language You can select the user interface language, Japanese or English.
  • Page 9: Projector Registration

    4. Projector registration 4.1. Connection Connect the controller computer and the projector, which have installed “ProjectorView Global+”, to a commercially available LAN cable or wireless LAN adapter. When connecting multiple projectors, use a commercially available ethernet hub. • A LAN terminal or 802.11b/g/n wireless LAN adapter is required for the controller computer. •...
  • Page 10 4. Projector registration Connection example 4 Projector Controller computer Projector Commercially available LAN cable External ethernet hub Connection example 5 Projector External ethernet hub Router Projector Controller computer External ethernet hub Connection example 6 Projector Router External ethernet hub Projector Controller computer Projector External...
  • Page 11: Registration Of Projector To "projectorview Global

    4. Projector registration 4.2. Registration of projector to “ProjectorView Global+” The procedures to register projectors vary among the foregoing connection examples. • In connection examples 1 to 4 (where projectors are installed within the same local network), the projectors within such network are automatically detected and registered. For details, see procedure A below. •...
  • Page 12 4. Projector registration Procedure B - Connection examples 5 and 6 (where projectors are installed via a router) To automatically detect projectors connected via a router, specify a range of IP addresses to search that particular IP address using “Search Projector Setting”. (1) Start up “ProjectorView Global+”.
  • Page 13: When Changing The Projector Ip Settings

    4. Projector registration <Note> • If you want to connect a projector via a router after automatically detecting it, you need to specify a search range of IP addresses that includes the projector’s IP address in advance. • Note that a different IP address may be assigned every time you start the projectors. If a connection cannot be established, specify the projector search range and execute “Search Projector”...
  • Page 14: When Changing Projector Settings

    4. Projector registration 4.4. When changing projector settings (1) Select the projector which you like to change from the projector list on the main screen. (2) Select “Edit Projector Setting” from “Confi guration” of the menu bar. • “Edit Projector Setting” window is displayed. (3) Set the Projector Name and its group and the theft detector.
  • Page 15: Operation Of Projector

    5. Operation of projector 5.1. Operation of projector by remote controller Group or single unit of projector can be operated. (1) Select the projector which you like to operate from the projector list on the main screen. • When selecting more than one projector simultaneously, select while pressing the Ctrl key. (2) Click [Remote Controller] of the tool bar on the main screen or when you like to operate a certain projector, double click the projector on the projector list on the main screen.
  • Page 16: Confi Rmation Of Projector Status

    5. Operation of projector 5.2. Confi rmation of projector status The status of the projector is displayed on the projector list on the main screen. Item Description Check Theft detector setting (ON/OFF) Projector list registration number Projector Name Projector name set in the application MAC Address MAC address of the projector IP Address...
  • Page 17: Schedule Setting

    6. Schedule setting 6.1. Creation of projector group Multiple projectors can be controlled and batched by sorting groups. Also, each group can set each time of the power supply ON/OFF every day. Since the schedule of the power supply ON/OFF is performed by each group, the projector which you like to operate at the same schedule should be integrated into the same group.
  • Page 18: When Changing Schedule Setting

    6. Schedule setting <Note> • The power supply ON and the power supply OFF can not be selected at the same time of the same day of the week. • The Schedule Setting will be executed while “ProjectorView Global+” is in operation. •...
  • Page 19: When Deleting Group

    6. Schedule setting 6.3. When deleting group (1) Select the group which you like to delete from the Group select pull-down menu on the main screen. (2) Select “Edit Schedule Setting” from “Confi guration” of the menu bar. • “Edit Schedule Setting” window is displayed. (3) Click [Delete].
  • Page 20: E-mail Setting

    7. E-mail setting When the communication with the projector monitored by the theft detector is disrupted, a warning E-mail can be sent to the designated address, enabling to serve for early detection of the projector theft. The E-mail setting can not be set at every projector and every group. The same setting should be set for all projectors.
  • Page 21: Visual Pa2 (visual Pa2 Enabled Projectors Only)

    8. Visual PA2 (Visual PA2 enabled projectors only) Visual PA2 is a feature to display messages on the projector screen. It can be used for all active Visual PA2 enabled projectors. Additionally, the projector is capable of reading aloud on-screen messages using the Text Speech function. Note that some projectors may not have this function.
  • Page 22: Saving Messages Entered And Settings Specifi Ed In Visual Pa2

    8. Visual PA2 (Visual PA2 enabled projectors only) 8.2. Saving messages entered and settings specifi ed in Visual PA2 You can save messages entered in Textbox, as well as settings specifi ed for Text, Frame, Location, and Text Speech. These must be saved before you activate the Schedule function in the Visual PA2 window. (1) Enter text in Textbox, specify settings for Text, Frame, Location, and Text Speech, and then click [Save].
  • Page 23: Confi Guring The Schedule Function Of Visual Pa2

    8. Visual PA2 (Visual PA2 enabled projectors only) 8.5. Confi guring the Schedule function of Visual PA2 By using the Visual PA2’s Schedule function, your intended messages can be displayed on the screen at a set time. (1) Click [Edit] in the Schedule area. •...
  • Page 24: Projectorview (projectorview Enabled Projectors Only)

    ProjectorView is a web-browser based remote control and monitoring tool for network projectors. ProjectorView is not available when using other than the projectors listed on page 30. For more information on ProjectorView, see the LAN Control Utility manual that comes with the projector. 9.1. Starting ProjectorView (1) Select the projector that you want to operate from the list of projectors on the main screen.
  • Page 25: Telnet Setup (telnet Enabled Projectors Only)

    You can set the password, ProjectorView display language, LAN control, and PJLink certifi cation by Telnet. Telnet is not available when using other than the projectors listed on page 30. For more information on Telnet, see the LAN Control Utility manual that comes with the projector. <Note>...
  • Page 26: Web Ui (roomview Connected Projectors Only)

    11. Web UI (RoomView Connected projectors only) Web UI is a tool to control and monitor the projector using a Web browser. For some projectors, you have to change a setting in projector menu to enable this function. 11.1. Main functions •...
  • Page 27 11. Web UI (RoomView Connected projectors only)  Freeze: Pauses the displayed video. Clicking this button again will resume the normal video display. Contrast: Adjusts the contrast of the video. Brightness: Adjusts the brightness of the video. Color: Adjusts the color density of the video. Sharpness: Adjusts the sharpness of the video.
  • Page 28 11. Web UI (RoomView Connected projectors only)  Web UI Tools screen When you click [Tools] on the control screen, the following screen will appear. You can confi gure the settings of the currently connected projector using this screen. You can go back to the control screen by clicking [Exit]. ...
  • Page 29 11. Web UI (RoomView Connected projectors only)  Web UI Info screen When you click [Info] on the control screen, the following screen will appear. This screen shows the information and status of the currently connected projector. You can go back to the control screen by clicking [Exit]. ...
  • Page 30: Others

    12. Others 12.1. Troubleshooting • The projector can not be recognized. The projector may not be recognized automatically due to the setting of fi re wall. In such case, the communication of “ProjectorView Global+” should be registered as an exception to the fi re wall. For the setting of the fi...

This manual also for:

Projectorview global+

Comments to this Manuals

Symbols: 0
Latest comments: