Ethernet Parameter Setting Function; Ethernet Parameter Setting - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

3.12

Ethernet parameter setting function

The Ethernet parameter setting function is not available for the following models.
Model: All models except for Ethernet models
The Ethernet parameter setting function is a dedicated software for setting the minimum necessary inverter parameters via
Ethernet to perform Ethernet communication.
The setting function is not available for parameters of the inverter connected via CC-Link IE TSN.
To start the Ethernet parameter setting, choose [Ethernet parameter setting] in the [Tool] menu.

3.12.1 Ethernet parameter setting

In the "Ethernet parameter setting" window, the network number, station number, host name, IP address, and subnet mask can
be set.
182
3. FUNCTION
3.12 Ethernet parameter setting function