E-Mail Setting; Connection With E-Mail Server; Sending Test E-Mail - Mitsubishi Electric PJLink FD630U User Manual

7. E-mail setting

When the communication with the projector monitored by the theft detector is disrupted, a warning E-mail can be
sent to the designated address, enabling to serve for early detection of the projector theft.
The E-mail setting can not be set at every projector and every group. The same setting should be set for all
projectors.
7.1.

Connection with E-mail server

Connect the E-mail server to the network to which the controller PC and the projector are connected that
"ProjectorView Global+" is operating.
7.2. E-mail setting
Designate the address of the E-mail server and the address of the destination to be sent.
<Note>
• As for the network environment, confirm to the network administrator.
(1) Select "Edit E-mail Setting" from "Configuration" of the menu bar on the main screen.
• "Edit E-mail Setting" window is displayed.
(2) Input the setting item for the network environment, and click [Save].
Item
E-mail Server (SMTP)
Destination E-mail
Address

7.3. Sending test E-mail

After completing the setting of the each item on the E-mail Setting window, a test E-mail can be sent to confirm
whether the E-mail is correctly delivered to the destination. When clicking [Test E-mail] at the upper right on the E-
mail Setting window, the test E-mail is issued. Confirm whether the E-mail is correctly delivered to the destination
address.
<Note>
• The E-mail function will be executed while "ProjectorView Global+" is in operation.
• If the test E-mail is not correctly received, confirm the address of the E-mail server and the destination, and the
connection status of the network. For details, make an inquiry to the network administrator.
• The E-mail may possibly not be delivered depending on the certification function of the E-mail server. For details,
make an inquiry to the network administrator.
• When the communication with the projector monitored by the theft detector is disrupted, a theft check error dialog
is displayed.
However, the projector list isn't updated at the same time because it takes some time to update the list.
Description
Input the IP address of the E-mail server (Example: 192.168.7.230), or input the
server name (Example: mail.example.com).
Input the IP address of the destination to be sent within 64 one-byte characters.
(Up to 3 places can be designated at the maximum.)
19