Specifying The Running Frequency (Rotation Speed, Machine Speed) - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

The connected inverter's operation mode can be verified in the operation mode indicator.
Switches to the PU
operation mode.
NOTE
• Some operation modes cannot be switched according to the present operation mode and parameter settings. For example,
the initial setting does not allow switching between the PU operation mode and the Network operation mode. (For the details,
refer to the Instruction Manual of the inverter.)
3.9.3 Specifying the running frequency (rotation speed,
machine speed)
Input a desired frequency (rotation speed, machine speed) to the frequency (speed) input section and press the [Setting] button
to write the set frequency to the inverter. To increase or decrease a read setting frequency in minimum setting increments, use
the buttons at the right side of the input section.
Symbol Name
A Frequency setting
B Setting
Switches to the External
operation mode.
Switches to the Network operation mode.
A
Increase/decrease the frequency
(rotation speed, machine speed)
in minimum increments.
Function/description
Appears in the following situations.
Frequency/ • When offline
rotation speed/ • When the selected station's set frequency unit is other than the frequency,
machine speed rotation speed, and machine speed.
• When the set frequency information acquisition fails.
Appears when the frequency (Hz) has been set as the set frequency unit for
Frequency
the selected station.
Appears when the rotation speed (r/min) has been set as the set frequency unit
Rotation speed
for the selected station.
Appears when the machine speed has been set as the set frequency unit for
Machine speed
the selected station.
Set the set frequency.
Operation mode indication
B
3.9 Test Operation
1
2
3
4
5
6
7
8
9
10
165
3. FUNCTION