Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 107

Symbol
A Motor type
Wiring length from
B
inverter to motor
C Control method
D Control mode
E Motor information
 Encoder option selection (Pr.862 = "10 or 11")
When Pr.862 = "10 or 11", position control and PM motor vector control are disabled. The following functions are enabled
instead.
Function disabled
Vector control with encoder (induction motor, position
control)
Vector control with encoder (PM motor, speed control)
Vector control with encoder (PM motor, position control)
 Offline auto tuning
Perform offline auto tuning.
Symbol
A Tuning method
B Forward rotation
C Reverse rotation
D Stop
NOTE
• The [Forward rotation] and [Reverse rotation] buttons are disabled when the computer is connected with the inverter via CC-
Link IE network communication.
 Encoder option selection (Pr.862 = "10 or 11")
When Pr.862 = "10 or 11", position control and PM motor vector control are disabled. The following functions are enabled
instead.
Function disabled
Vector control with encoder (induction motor, position
control)
Vector control with encoder (PM motor, speed control)
Vector control with encoder (PM motor, position control)
106
3. FUNCTION
3.1 Parameter list
Name
Select the motor type.
Select [Within 30 m] or [Longer than 30 m].
Select the control method.
Select the control mode.
Set the motor information.
A
Name
Select the tuning method.
The motor rotates in the forward direction.
The motor rotates in the reverse direction.
Stops the operation.
Function/description
Functions enabled instead
Vector control with encoder (induction motor, position control)
PM sensorless vector control (PM motor, speed control)
PM sensorless vector control (PM motor, speed control)
B C
Function/description
Functions enabled instead
Vector control with encoder (induction motor, position control)
PM sensorless vector control (PM motor, speed control)
PM sensorless vector control (PM motor, speed control)
D