Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 152

Symbol Name
A
Display period
B Station number selection
C Monitor item selection
D Unselect all
E Unselect all
F OK
G Cancel
After selecting the monitor items in the trend monitor setting window, the trend monitor window appears.
Symbol Name
A
Pause
B
Resume
C All screen copy
D Screen copy
E Frequency setting value
scale
*1 The [Pause] and [Resume] buttons are effective for the batch monitor window and all trend monitor windows.
 Monitor item
• For information about the list of items and the details of each item, refer to the section about monitor items in the manuals
of the inverter.
NOTE
• If a communication error occurs, batch monitoring will be stopped. To perform batch monitoring again, go offline once after
correcting the cause of the communication error, and then go online again.
• If an inverter fault occurs during batch monitoring, the output frequency, output current, and output voltage monitors hold the
monitored values at the time the fault.
Select the maximum point of the scale in seconds for the elapsed time axis of a graph in the trend
monitor window.
Select station(s) for displaying the graph of monitor items.
Set monitor items to display.
Unselects all station numbers.
Unselects all monitor items.
Applies the selection of the station and monitor items to the trend monitor window.
Discards the monitor settings, and closes the monitor setting window.
A B C
Pauses acquisition of monitor data.
Resumes acquisition of monitor data.
Saves all of the displayed trend monitor windows to the clipboard.
Saves the trend monitor window to the clipboard. This button is effective for the window on which
the button is placed.
Scales the vertical axis.
Function/description
D
Function/description
*1
*1
E
3. FUNCTION
3.5 Batch monitor
1
2
3
4
5
6
7
8
9
10
151