Explanation Of The Operating Window Of Fr Configurator2; Main Frame; Project Tree Area - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

2.2
Explanation of the operating window of FR
Configurator2
This section explains the screen configuration of FR Configurator2.
2.2.1

Main frame

The main frame (main screen) of FR Configurator2 consists of two areas.
• Project tree area (Refer to
An area for showing information of the registered inverter, or for making settings. "System setting", "Graph", and "Batch
monitor" are available in this area.
• Sub-window area (Refer to
An area for showing obtained monitor data of the inverter. "Parameter list", "Graph", "Batch monitor", and "Fault history"
are available in this area.
A
B

Project tree area

C
Symbol Name
A Menu bar The window of each function is displayed from the menu bar.
B Toolbar The window of each function is displayed in the sub-window area by selecting an icon on the toolbar.
C Status bar The model name, operating status, etc. are displayed.
Adjustment of the project tree area size and sub window area size is available. To resize the project
D Split line tree area and sub window area to their original size, from [Window] of the menu bar, choose [Reset
window layout].
2.2.2 Project tree area
"Parameter list" and "Safety parameter setting" of the inverters registered in the project, "System setting", "Graph", and "Batch
monitor" are listed in the project tree area. Select such an item to display the window in the sub-window area.
page 81.)
page 83.)
D
Sub-window area
Function/description

2.2 Explanation of the operating window of FR Configurator2

10
Refer to
page
85
92
—
81
2. PROJECT CREATION
1
2
3
4
5
6
7
8
9