Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 109

 Start command and frequency setting method
Set parameters related to the start command and frequency (speed) setting method.
Symbol
Start command input
A
method
Frequency (speed)
B
setting method
 Output terminal (FM/CA) calibration
Set parameters related to the output terminal calibration.
Symbol
A UP button
B DOWN button
108
3. FUNCTION
3.1 Parameter list
A
B
Name
Select "External signal input (terminal STF/STR)", "PU (FWD/REV key)", or "Communication (RS-
485 terminals / Ethernet connector / communication option)". (Refer to Pr.79, Pr.338, Pr.339,
Pr.340.)
Select an option in the list, which is determined according to the start command input method.
Name
The meter needle goes up. (Refer to Pr.900.)
The meter needle goes down. (Refer to Pr.900.)
Function/description
A
B
Function/description
A
B