Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 106

Symbol Name
Station number
A
selection
Operation mode
B
button
Operation mode
C
indication
D Batch read
E Batch write
Trace operation
F
indicator
G Trace setting
H Unit selection
I Undo
J Redo
 Motor setting
Set motor-related parameters.
Function/description
Select a station number for function setting.
Switch between the operation modes of the inverter.
Displays the operation mode.
Used to read the inverter parameter settings and reflect them in the
window for settings by function.
Used to write the contents of the window for settings by function to the
inverter parameters.
Displays the present trace operation status.
Displays the trace setting window.
Click the [Unit selection] button to display the unit selection dialog.
In the "Unit selection" dialog, the frequency (Hz), rotation speed (r/min),
or machine speed can be selected.
Click the [Undo] button to reset the settings of the edited parameters to
the previous values.
Click the [Redo] button to cancel the change by selecting the [Undo]
button.
A
C
D
Corresponding window
Common for all windows
Motor setting
Acceleration/deceleration
pattern and time setting
Start command and frequency
setting method
Input terminal assignment
Output terminal assignment
Analog input terminal 2
calibration
Analog input terminal 4
calibration
Trace setting
Point table
Trace setting
Trace command
Point table
B
E
3. FUNCTION
3.1 Parameter list
1
2
3
4
5
6
7
8
9
10
105