Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 18

 Example (Ethernet communication)
Refer to Connection options on
FR Configurator2
*1 When an Ethernet port is used on the computer, use a 1000BASE-T compliant Ethernet cable.
Ethernet cable
Category 5e or higher straight
cable (double shielded/STP)
*2 For the connection with the inverter using a programmable controller, refer to the Operating Manual of GX Works with the version applicable to
the programmable controller CPU.
 Connection options
The following table shows connection options. Refer to the following schematic diagrams for connection examples.
Number of
connectable
inverters
USB
Serial
One
Ethernet
Serial
Two or more
Ethernet
USB or serial
USB or Ethernet
One, or two or more USB, serial, or Ethernet
USB
Refer to page 26 for details of connection between a personal computer (FR Configurator2) and inverters.
page 17 to configure the system.
Ethernet Ethernet
connector connector
Ethernet
connector ∗1
Ethernet
connector
Inverter
Connector
Use cables compliant with the following standards. IEEE 802.3
RJ-45 connector
(1000BASE-T), ANSI/TIA/EIA-568-B (Category 5e)
PC-side port Intermediate device
Not connected
Not connected
Not connected
Not connected
Not connected
GOT1000
GOT2000
Programmable controller
GOT2000 to
programmable controller
USB connector, Serial port
Ethernet
or Ethernet connector
connector
QCPU/LCPU/RCPU
Programmable controller ∗2
Hub
Ethernet Ethernet
connector connector
Inverter Inverter
Standard
Communication
USB
Serial
Ethernet or CC-Link IE Field
Network Basic
Serial
Ethernet
CC-Link IE TSN communication 19,
Serial
Serial or Ethernet
Ethernet
CC-Link IE Field Network
CC-Link IE TSN communication 21,
Ethernet
CC-Link IE Field Network
Commercially available
printer
GOT2000
Ethernet
connector
Ethernet Ethernet
connector connector
Inverter Inverter
Refer to
page
18, 30
18, 34
18, 39
18, 48
19, 39
44
19, 51
20, 51
20, 58
20, 58
59
21, 58
21, 58
1. OUTLINE
1.2 System configuration
1
2
3
4
5
6
7
8
9
10
17