Connection Setting For The Convert Function; Convert Procedures - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

Symbol
A Specify source
B Convert...
C Reflect...
Source inverter
D
information
E Source parameter list
Target inverter
F
information
G Target parameter list
H Help
3.3.3

Connection setting for the convert function

Select [Specify source] in the convert window to display the "Source" window.
To perform the convert function from the inverter connected via communication, select [Read from connected inverter] and click
[Connection setting] to display the [Connection setting] window. For the "Connection setting" window, refer to
3.3.4

Convert procedures

 To convert from the directly connected inverter
NOTE
• Perform this procedure while the inverter is stopped. Do not give a start command to the inverter.
1.
Select [Specify source] in the "Convert" window to display the "Source" window.
122
3. FUNCTION
3.3 Convert
Name Function/description
Displays the "Source" window. Select the source parameter file (*.pr4, *.pr3, *.prm) or the source
inverter model.
Displays the "Convert" sub window.
Displays the "Reflect" window. The converted setting of parameters will be reflected to the
parameter list of the specified inverter. The setting can also be saved to a parameter file (*.pr4).
(Select [Save in file] or [Reflect to project] after converting the parameters.)
The model of the source inverter and the options connected to it are displayed.
The list of the parameter settings read from the source is displayed.
The model of the target inverter and the options connected to it are displayed.
The list of the converted parameter settings is displayed.
Displays the help window.
Select [Specify source]
page 75.