Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 200

 Ethernet connection (for inverters in the same network)
The following procedure is for the connection with one inverter. Inverter parameters are set to initial values. The IP address of
the personal computer is "192.168.50.100". Before update, download the firmware file from the Mitsubishi Electric FA Global
Website.
1.
Start FR Configurator2. (Record the parameter setting values before firmware update by performing parameter
batch read or other functions when the same setting values are to be used after the update.)
2.
Select [Firmware Update Tool] in the [Tool] menu.
3.
In the "Firmware Update Tool" window, select [
the "Read file" button to read model information.
4.
In the "Firmware Update Tool" window, select [Ethernet] in [Select interface].
5.
Click the "Select adapter" button. In the "Select Ethernet Adapter" window, select the network adapter to which the
personal computer and inverter are connected. Then click the "OK" button.
6.
Click the "Scan network" button. In the "Scan Network" window, select [Search for VFDs in the same network]. Then
click the "Scan" button. Change the "Time setting" settings according to the number of connected inverters or the
interface.
Personal computer Ethernet connection
] in [Select VFD firmware] to select the firmware file (*.bin). Click
Inverter
3.14 Firmware update
1
2
3
4
5
6
7
8
9
10
199
3. FUNCTION