Download  Print this page

Schedule Setting; Creation Of Projector Group - Mitsubishi Electric LAN CONTROL UTILITY Operation Manual

Lan control utility.
Hide thumbs

Advertisement

6. Schedule setting

6.1. Creation of projector group

Multiple projectors can be controlled and batched by sorting groups.
Also, each group can set each time of the power supply ON/OFF every day.
Since the schedule of the power supply ON/OFF is performed by each group, the projector which you like to
operate at the same schedule should be integrated into the same group.
When Power ON and Power OFF are enabled, their time settings are indicated on the schedule list.
[Example] When setting the schedule for the group "group 1" to turn the power supply ON at 9:00 on Monday,
turning OFF at 17:00 on the same day, ON at 8:30 on Thursday, and OFF at 17:40 on Friday.
(1) Select "Add New Group" from "Set Configuration" of the menu bar.
• "Add New Group" window is displayed.
(2) Input the group name to be created in the "Group Name" column (within 16 characters in one-
byte alphanumeric symbol).
(3) Select the day of the week to be set for the time of the power supply ON/OFF.
(4) Only when setting the time of the power supply ON, set the time in the "Power ON" column, and
put a check mark in the "Enable" box.
(5) Only when setting the time of power supply OFF, set the time in the "Power OFF" column, and
put a check mark in the "Enable" box.
(6) When there are more than one day of the week to be set for the power supply ON/OFF
schedule, repeat the procedure (3) to (5).
Group name
Day of the week
Time of power supply
ON
Time of power supply OFF
When validating the
setting, put a check mark
in the box.
Schedule list
Time of power supply ON/OFF
18

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric LAN CONTROL UTILITY

Comments to this Manuals

Symbols: 0
Latest comments: