HID FARGO HDP 6600 User Manual page 98

Powering
Trusted Identities
SNMP settings
1. Select the SNMP link to display the current SNMP network settings.
Field
SNMP Settings
SNMP v1/v2c
SNMP v3
Device
2. Make any necessary changes and click Save.
You may need to confirm your administrative rights by entering a valid user name and password. You may also need
to restart the printer to save any changes. See
PLT-02931, A.4
Description
Enable or disable simple network management protocol (SNMP). Select the version you wish to use.
Available options are SNMP v1/v2c and SNMP v3. Also specify the UDP Port Setting.
Enter the Read Community Name and the Write Community Name for the SNMP v1/v2c setting.
Enter the Read User Name/Write User Name, Security Level, auth-password, and priv-password for the
SNMP v3 settings.
Enter the Location, Contact, Encryption Algorithm, and the Authentication Method for this device.
5.5.3 Changes to the
FARGO® HDP®6600 High Definition Card Printer/Encoder
settings.
98
User Guide
November 2021