HID FARGO HDP 6600 User Manual page 121

Powering
Trusted Identities
Printer Error Message
Mag Verify Error
No Ecard Encoder
Headlift Error
Waiting For Data
Job Data Error
Heater Error
6.3 Printer display icons
This table identifies the icons on the printer display and their meaning.
Icon
PLT-02931, A.4
Cause
The printer is unable to verify encoded data. Check the cards and click Cancel Print on the
No smart prox card encoder is installed in
the printer.
The headlift sensor is not detecting
movement from the headlift cam. This can
occur for the printhead, transfer roller, or
card flattener.
Entire print job is unable to be sent to the
printer
The transfer roller or card flattener can not
achieve correct temperature.
Description
Initialization Screen
Ready Screen
Low Ribbon / No Ribbon
Low Film / No Film
121
FARGO® HDP®6600 High Definition Card Printer/Encoder
Solution
printer display.
To cancel, click Cancel Print on the printer
display.
Reboot the printer by cycling the power.
To cancel, press Cancel Print on the printer
display.
Verify physical connection to the printer. To
cancel, press Cancel Print on the printer
display.
To cancel, press Cancel Print on the printer
display. Reboot the printer by cycling the
power.
Notes
The printer is initializing. The status bar at
the bottom of the screen indicates the
remaining time.
The printer is ready to be sent a job.
This icon is displayed in the upper right
portion of the Ready screen when the ribbon
material is low.
When there is not a ribbon installed, this
icon blinks three times then holds solid for
15 seconds in a continuous loop.
This icon is displayed in the upper right
portion of the Ready screen when the film
material is low.
When film material is not installed, this icon
blinks three times then holds solid for 1.5
seconds in a continuous loop.
User Guide
November 2021