HID FARGO HDP 6600 User Manual page 82

Powering
Trusted Identities
Laminator settings
Setting
Lam Rotator Card Position Offset
Lam Rotator Portrait Offset
Lam Rotator Landscape Offset
Lam Flipper Home Offset
Lam Flipper Inverted Offset
Lam Flipper Card Position Offset
Lam Right Full Card Top Of Form
Lam Right Laminate Top Of Form
Lam Right Full Card End Of Form
Lam Right Half Card End Of Form
Lam Left Full Card Top Of Form
Lam Left Laminate Top Of Form
Lam Left Full Card End Of Form
PLT-02931, A.4
Description
Position of the card on the rotator. 1 = .0014 inches.
Angle of the rotator in the portrait position. 1 = 1°
Angle of the rotator in the landscape position. 1 = 1°
Flipper angle at the home position (plastic pinch rollers facing up). 1 = .75°
Flipper angle opposite the home position (rubber driver rollers facing up) 1 = .75°
Position of the card on the flipper table. 1 = .0076 inches.
Controls the card's leading edge position relative to the hot roller. 1 = .0014 inches.
Controls the right side lam patch leading edge position relative to the card. 1 = .0014 inches.
Position of the end a lamination. 1 = .0014 inches.
Position of the end of a half patch lamination. 1 = .0014 inches.
Card's leading edge position relative to the hot roller. 1 = .0014 inches.
Controls the right side lam patch leading edge position relative to the card. 1 = .0014 inches.
Position of the end a lamination. 1 = .0014 inches.
82
FARGO® HDP®6600 High Definition Card Printer/Encoder
User Guide
November 2021