HID FARGO HDP 6600 User Manual page 81

Powering
Trusted Identities
Setting
Flipper Offset Mag
Image Length
Internal Encoder offset in
mm
Flattener TOF offset
Job Canceling Timeout
Period
Ribbon Queueing
Position Offset
Mag Verify
PLT-02931, A.4
Description
This setting fine tunes the position of the flipper relative to the mag encoder. Only use if a mag encoder is
installed.
Fine tunes the length of the image on the card. Increase this value if the image length is too short. Decrease
this value if the image length is too long.
Fine tunes the position of the card when docking into Bay 0.
Adjusts the position of the card when the flattener roller engages.
Slower PCs can have difficulty canceling all print jobs. Increase this value if all print jobs do not get canceled
and instead some restart printing.
Fine tunes the position of the ribbon prior to printing. Adjust if printing starts in the previous panel or goes off
into the next panel.
If set to 1, enables verification of encoded mag data.
FARGO® HDP®6600 High Definition Card Printer/Encoder
81
User Guide
November 2021