System Information Page; Connectivity Test - Hughes Jupiter HT1100 User Manual

System Information page

Connectivity Test

Chapter 2 ● System Control Center
16
1039650-0001 Revision A
Figure 9: System Status page
The System Information page, shown in Figure 10, provides system information for
the satellite modem such as identification information, software versions, and
satellite information.
Figure 10: System Information page
Use the Connectivity Test
Hughes Network Operations Center (NOC). To test your connectivity:
1. Click the Connectivity Test
Connectivity Test appears in the center of the screen.
2. Click the Start the test
link on the side panel to check the connectivity to the
link on the side panel. The Terminal - Gateway
link as shown in Figure 11.