5 Transport and storage
5.1 Protective Equipment
The following protective equipment is required for handling purposes:
•
Protective work shoes
•
Sturdy work gloves
5.2 Checking the Delivery
The scope of delivery can be found in the order confirmation. The weights and dimensions are listed in the delivery notes.
1. Compare the entire delivery with the supplied delivery notes to make sure nothing is missing.
2. Damage caused by defective packaging or occurring in transit must be reported immediately to the carrier and
Probst.
CAUTION
Battery damaged during transport
Risk of explosion due to sparks or open fire.
Danger of chemical burns due to acid discharge.
Keep sparks and open fire away from the lifting device.
Have the battery replaced by qualified personnel only.
Wear acid-resistant work gloves.
Wear eye protection.
See the operating instructions for the battery in the appendix.
5.3 Removing the Packaging
The device is supplied shrink wrapped on a pallet.
NOTE
Sharp knives or blades
Damage to components!
Ensure that no components are damaged while opening the packaging.
1. Remove labeled transport aids and securing devices.
2. Open and remove the shrink wrap.
3. Dispose of the packaging material in accordance with the applicable national laws and guidelines.
5.4 Transporting the Lifting Device
52400046 / 52400048
Transport and storage
21 / 58
Need help?
Do you have a question about the SH-2500-UNI-GL and is the answer not in the manual?
Questions and answers