7.2.5 Log file example
Event logs of ISC NID UP304 updated 2020/11/18 16:59:56
[Section 1 - Event logs]
380
2020/11/18 16:53:49
375
2020/11/18 16:53:44
356
2020/11/18 16:53:25
30
2020/11/18 16:53:52
27
2020/11/18 16:47:56
5
2020/11/18 16:47:30
0
2020/11/18 16:47:25
0
2020/11/18 16:47:25
92
Rel. 0 d 00:01:32
90
Rel. 0 d 00:01:30
70
Rel. 0 d 00:01:10
61
Rel. 0 d 00:01:01
0
Rel. 0 d 00:00:00
0
0 d 00:00:00
[INFO]
[Section 2 - Diagnostic events log]
380
Rel. 0 d 00:06:20
375
Rel. 0 d 00:06:15
356
Rel. 0 d 00:05:56
30
Rel. 0 d 00:00:30
27
Rel. 0 d 00:00:27
5
Rel. 0 d 00:00:05
7.2.6 Event list
The event logs are listed below:
Event
Diagnostic errors
System Boot
System configuration
Factory reset
Stop signal
Restart signal
Detection access
Detection exit
Dynamic configuration in use INFO
Muting status
Fieldbus connection
SBV System Series | Instruction manual v1.2 DEC 2021| SAF-UM-SBVBus-en-v1.2 | © 2021 Inxpect SpA
[ERROR]
SENSOR#1
[ERROR]
SENSOR#1
[INFO]
CONTROL UNIT
[ERROR]
SENSOR#1
[ERROR]
SENSOR#1
[ERROR]
SENSOR#1
[INFO]
CONTROL UNIT
[INFO]
CONTROL UNIT
[INFO]
CONTROL UNIT
[INFO]
CONTROL UNIT
[INFO]
SENSOR#1
[INFO]
SENSOR#1
[INFO]
CONTROL UNIT
CONTROL UNIT
System Boot #61
[ERROR]
SENSOR #1
[ERROR]
SENSOR #1
[INFO]
CONTROL UNIT
[ERROR]
SENSOR #1
[ERROR]
SENSOR #1
[ERROR]
SENSOR #1
Type
ERROR
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
CAN ERROR (Disappearing)
CAN ERROR (Code: 0x0010)
System configuration #16
ACCELEROMETER ERROR (Disappearing)
ACCELEROMETER ERROR (Code: 0x0010)
Signal error (Code: 0x0012)
Dynamic configuration #1
System Boot #60
Detection exit (field #2)
Detection exit (field #1)
Detection access (field #2, 3100 mm/20°)
Detection access (field #1, 1200 mm/30°)
Dynamic configuration #1
CAN ERROR
(Disappearing)
CAN ERROR (Code: 0x0010)
System configuration #16
ACCELEROMETER ERROR
ACCELEROMETER ERROR (Code: 0x0012)
Signal error (Code: 0x0014)
7. Maintenance and troubleshooting
COMMUNICATION LOST
TILT ANGLE ERROR
MASKING
COMMUNICATION LOST
(Disappearing)
TILT ANGLE ERROR
MASKING
69
Need help?
Do you have a question about the SBV System Series and is the answer not in the manual?