Table of Contents
Advertisement
6. Installation and use procedures
5. Loosen the tamper-proof screws to tilt the
sensor.
7. Tighten the screws.
54
SBV System Series | Instruction manual v1.2 DEC 2021 | SAF-UM-SBVBus-en-v1.2 | © 2021 Inxpect SpA
6. Direct the sensor up to the desired inclination,
see "Sensor position" on page 42.
Note: a notch is equal to 10° of inclination.
Advertisement
Table of Contents
Need help?
Do you have a question about the SBV System Series and is the answer not in the manual?