Inxpect SBV System Series Instruction Manual page 10

2. Safety
2.1.8 WARNINGS FOR THE RESTART PREVENTION FUNCTION
The restart prevention function is not guaranteed in blind spots. If required by the risk assessment, implement
l
adequate safety measures in those areas.
Machinery restarting must be enabled only in safe conditions. The button for the restart signal must be
l
installed:
outside of the dangerous area
o
not accessible from the dangerous area
o
in a point where the dangerous area is fully visible
o
2.1.9 RESPONSIBILITY
The machinery manufacturer and system installer are responsible for the operations listed below:
Providing adequate integration of the safety output signals of the system.
l
Checking the monitored area of the system and validating it based on the needs of the application and risk
l
assessment. Following the instructions provided in this manual.
2.1.10 LIMITS
The system cannot detect the presence of people who are immobile and not breathing or objects within the
l
dangerous area.
The system does not offer protection from pieces ejected from the machinery, from radiation, and objects
l
falling from above.
The machinery command must be electronically controlled.
l
2.1.11 DISPOSAL
In safety-related applications, comply with the mission time reported in "General specifications" on page 79.
For decommissioning follow the instructions reported in "Disposal" on page 100.
10
SBV System Series | Instruction manual v1.2 DEC 2021 | SAF-UM-SBVBus-en-v1.2 | © 2021 Inxpect SpA