Installing The Controller; Overview - Mitel 3300 Technician's Handbook

Technician's Handbook

Installing the Controller

This section contains detailed instructions on installing
and configuring the 3300 ICP Controller.

Overview

Installing the Controller Hardware (page 15):
1. Install the Controller Hard Drive (page 17).
2. Install the System ID Module (page 18).
3. Install the DSP Module(s), if required (page 19).
4. Connect the Maintenance PC to the Controller
(page 20).
5. Turn on the Controller (page 20).
6. Verify the Connections (page 21).
7. Program the License and Option Keys (page 21).
Connecting the Controller to the Network (page 23):
1. Set the Controller RTC IP address (below).
2. Program the Controller DHCP settings. (page 25)
3. Verify the Operation of the Controller (page 27).
4. Configure the Layer 2 switch (page 28).
14