Technician's Handbook
Installing Phones and Peripherals
This section contains information on installing telephone
sets, consoles, and other peripherals.
The 3300 ICP supports a number of IP, DNI, analog and
wireless phones, as well as conference units,
programmable key modules and operator consoles.
Installing Phones
Refer each phone's Installation Guide (included in the
phone's package) to install the phones.
Programming Phones
In ESM, enter the required programming and registering
information in the applicable forms in the Devices folder
(System Configuration section). See the Online Help
for more information.
Next: When all the Phones and Peripherals are installed
and programmed, go to "Programming Voice Mail"
below.
Programming Voice Mail
In ESM, program the required voice mail settings in the
Voice Mail folder (System Administration section).
See the Online Help for more information.
Next: When all the voice mail settings are programmed,
go to Saving the Settings below.
80
Note: These settings will not take effect until you reboot
the system in the next section.