About This Appendix
This appendix provides a basic record for your planning
information.
Installation Planner
The following required and default settings are
necessary for an installation.
Table 55. System Administration Tool Settings
System Administration Tool
Setting
username
password
Table 56. Controller Configuration Settings
Controller Configuration (RTC)
Note: Do not change these settings unless you are specifically directed to
make changes by a Field Change Instruction. Unauthorized changes may
prevent the system from booting up.
boot device
processor number
host name
file name
inet on ethernet (e)
inet on backplane (b)
host inet (h)
gateway inet (g)
user (u)
Default
system
password
Default Settings Settings to
Change
ata=0,0
0
/sysro/RTC8260
192.168.1.2:ffffff00
ftp
Personalized
IP address: sub-
net mask (hex)
IP address: ftp
server
Default Gateway
FTP user
(installer's PC)
235