Technician's Handbook
5. In the DHCP IP Address Range form, program the
Table 7. IP Address Range (Scope) Programming
Option ID
Name of the range
Subnet
IP Range Start
IP Range End
Protocol
Client's class ID
must match name
Lease Time
6. In the DHCP Options form, program the options
Table 8. Mitel DHCP Options
Option ID Value
128
129
130
132
133
26
scope using the information in Table 7 below.
Note: The following IP addresses are reserved for the
ASUs:
192.168.10.1 to 192.168.10.3
192.168.11.1 to 192.168.11.3
192.168.12.1 to 192.168.12.3
192.168.13.1 to 192.168.13.3
Value
a
Start of scope
a
End of scope
"BOOT or DHCP"
Clear checkbox.
2 Weeks
a. Cannot be modified once form is saved.
listed in Table 8 below for the scope you just
programmed.
Usually the Controller IP
Address
Usually the Controller
RTC IP Address
MITEL IP PHONE
VLAN ID (optional)
Priority (optional)
Notes/Example
Select subnet.
192.168.1.15
192.168.1.25
Notes/Example
168.192.1.2
168.192.1.3
2
6