Ip Networking - Mitel 3300 General Information Manual

3300 ICP General Information Guide
ISDN also supports enhanced voice communications capabilities. These capabilities include
Caller Line Identification Delivery (CLID), Automatic Number Identification (ANI), and Dialed
Number Identification Service (DNIS). These options allow you to identify who is calling and
facilitate call center and CTI applications, fast call set-up, call-by-call, and Min/Max for reduced
trunking. ISDN delivers the highest degree of voice clarity of any transmission medium available.

IP Networking

IP Networking provides customers with a new option for networking systems together. Instead
of leasing dedicated voice circuits, customers can route voice traffic over the existing LAN/WAN
infrastructure. Mitel's implementation of IP Networking uses a point-to-multi point topology
which ensures optimal use of network resources. This can result in significant cost savings.
IP Networking supports the MSDN/DPNSS protocols over the IP infrastructure. All the features
supported by MSDN/DPNSS over TDM trunks are supported over IP Networking. Controllers
can be clustered in a single location to provide greater resiliency than a single controller
operating autonomously. Controllers that are geographically separated can be seamlessly
networked to share information and services in a transparent and cost efficient manner. IP
Networking can be used as the primary communication between controllers or as a backup to
TDM networking.
A 3300 ICP with IP Networking enabled can be configured to act as an IP Networking gateway
for SX-2000, and SX-200
The IP Networking feature supports G.711 and G.729a encoding. Connections with up to 250
other network nodes are supported. A total of 2000 IP network connections are supported from
any one node and up to 200 connections can be defined between any two nodes.
IP Networking is enabled via the IP Networking License. One license is required per controller
in the network.
30
® PBXs or third-party PBXs. .